Researchers separate cotton from polyester In blended fabric
In a new study, North Carolina State University researchers found they could separate blended cotton and polyester fabric using enzymes – nature’s tools for speeding chemical reactions. Ultimately, they hope their findings will lead to a more efficient way to recycle the fabric’s component materials, thereby reducing textile waste.
However, they also found the process need more steps if the blended fabric was dyed or treated with chemicals that increase wrinkle resistance.
“We can separate all of the cotton out of a cotton-polyester blend, meaning now we have clean polyester that can be recycled,” said the study’s corresponding author Sonja Salmon, associate professor of textile engineering, chemistry and science at NC State. “In a landfill, the polyester is not going to degrade, and the cotton might take several months or more to break down. Using our method, we can separate the cotton from polyester in less than 48 hours.”
According to the U.S. Environmental Protection Agency, consumers throw approximately 11 million tons of textile waste into U.S. landfills each year. Researchers wanted to develop a method of separating the cotton from the polyester so each component material could be recycled.
In the study, researchers used a “cocktail” of enzymes in a mildly acidic solution to chop up cellulose in cotton. Cellulose is the material that gives structure to plants’ cell walls. The idea is to chop up the cellulose so it will “fall out” out of the blended woven structure, leaving some tiny cotton fiber fragments remaining, along with glucose. Glucose is the biodegradable byproduct of degraded cellulose. Then, their process involves washing away the glucose and filtering out the cotton fiber fragments, leaving clean polyester.
“This is a mild process – the treatment is slightly acidic, like using vinegar,” Salmon said. “We also ran it at 50 degrees Celsius, which is like the temperature of a hot washing machine.
“It’s quite promising that we can separate the polyester to a clean level,” Salmon added. “We still have some more work to do to characterize the polyester’s properties, but we think they will be very good because the conditions are so mild. We’re just adding enzymes that ignore the polyester.”
They compared degradation of 100% cotton fabric to degradation of cotton and polyester blends, and also tested fabric that was dyed with red and blue reactive dyes and treated with durable press chemicals. In order to break down the dyed materials, the researchers had to increase the amount of time and enzymes used. For fabrics treated with durable press chemicals, they had to use a chemical pre-treatment before adding the enzymes.
“The dye that you choose has a big impact on the potential degradation of the fabric,” said the study’s lead author Jeannie Egan, a graduate student at NC State. “Also, we found the biggest obstacle so far is the wrinkle-resistant finish. The chemistry behind that creates a significant block for the enzyme to access the cellulose. Without pre-treating it, we achieved less than 10% degradation, but after, with two enzyme doses, we were able to fully degrade it, which was a really exciting result.”
Researchers said the polyester could be recycled, while the slurry of cotton fragments could be valuable as an additive for paper or useful addition to composite materials. They’re also investigating whether the glucose could be used to make biofuels.
“The slurry is made of residual cotton fragments that resist a very powerful enzymatic degradation,” Salmon said. “It has potential value as a strengthening agent. For the glucose syrup, we’re collaborating on a project to see if we can feed it into an anaerobic digester to make biofuel. We’d be taking waste and turning it into bioenergy, which would be much better than throwing it into a landfill.”
The study, “Enzymatic textile fiber separation for sustainable waste processing,” was published in Resources, Environment and Sustainability. Co-authors included Siyan Wang, Jialong Shen, Oliver Baars and Geoffrey Moxley. Funding was provided by the Environmental Research and Education Foundation, Kaneka Corporation and the Department of Textile Engineering, Chemistry and Science at NC State.
Note to Editors: The study abstract follows.
Enzymatic textile fiber separation for sustainable waste processing
Authors: Jeannie Egan, Siyan Wang, Jialong Shen, Oliver Baars, Geoffrey Moxley and Sonja Salmon.
Published: March 8, 2023, Resources, Environment and Sustainability
Abstract: According to the US Environmental Protection Agency, around 11 million tons of post-consumer textile waste (PCTW) are disposed in U.S. landfills annually, which is 8% of all municipal solid waste. PCTW is landfilled because it contains complex blends of natural and synthetic fibers that are not easy to separate, and dyes and finishing chemicals on the fabrics interfere with recycling. The goal of this work was to develop a laboratory scale process for deconstructing and separating cut fabrics into different fiber fractions to create purified product streams that could promote textile recycling. Method parameters were selected from preliminary tests on various fabric types, followed by parametric evaluation with a set of rationally prepared model textile wastes. The combination of aggressive mechanical agitation together with cellulase catalyzed hydrolysis caused 100% cotton fabrics to disintegrate completely into a slurry of < 2 mm small solids and water soluble degradation products. The presence of reactive dyes on the model fabrics inhibited degradation, with the bifunctional reactive dye creating larger barriers to degradation than the monofunctional dye. Dye induced barriers were overcome with sufficient time, enzyme amount, and repeated treatment. Even though its collateral impact was a decrease in initial fabric burst strength, the presence of durable press (DP) finish on cotton presented a large obstacle to enzymatic degradation. This was overcome by including acid/alkali pretreatments to DP fabric before applying enzyme. The presence of polyester fiber in a cotton/polyester blend caused the fabric to retain its macroscopic knitted structure, while enzymatically degraded cotton was removed by washing and filtration to yield clean polyester. In all cases, fabric degradation products were separated by filtration into – depending on the severity of the treatments – residual large solids and small solids fractions and a clarified process liquid that contained soluble components. These three fractions were quantified gravimetrically and were characterized using high-performance liquid chromatography (HPLC), x-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), viscometry, scanning electron microscopy (SEM) and optical microscopy. The small solids present in the slurries after cotton degradation could be valuable as additives for paper, composites and other products, while the glucose-rich process syrups could be used to produce fuels and chemicals by fermentation, all of which would help divert PCTW from landfills. Importantly, even when cellulosic textile components were not fully degraded to soluble compounds, their conversion to pumpable slurries enabled easy handling of the degraded material and allowed recovery of non-degraded synthetic fibers by simple filtration and washing.
This post was originally published in NC State News.