New research from North Carolina State University, MIT and the University of Michigan finds that the surface texture of microparticles in a liquid suspension can cause internal friction that significantly alters the suspension’s viscosity – effectively making the liquid thicker or thinner. The finding can help address problems for companies in fields from biopharmaceuticals to chemical manufacturing.
“We heard about problems companies were having with pumping suspensions and became curious about what was causing these problems,” says Lilian Hsiao, an assistant professor of chemical and biomolecular engineering at NC State and lead author of a paper on the work. “Given the ubiquity of these types of fluids in the industry, we were surprised that no one had systematically looked at the role of surface roughness before. That turns out to be a really important factor in how these particle-laden fluids flow.”
Using a combination of simulations and laboratory experiments, the researchers found that what was slowing down the suspensions was friction. Specifically, the friction becomes significant when enough particles suspended in the liquid bump into each other. And the rougher the surface of the particles, the more friction they generate when they come into contact.
“It takes energy to pump a liquid suspension through a pipe or tube, and the friction created by interaction between particles dissipates a lot of that energy,” Hsiao says. “This dissipation slows down the movement of the suspension or, if the particles are very rough, can even stop it completely.” A video demonstrating the difference between suspensions with rough particles and suspensions with smooth particles can be found at https://www.youtube.com/watch?v=oXRl2IdwdhY.
This insight gives industries a couple of options: They can reduce friction by engineering the particles to have smoother surfaces, or they can increase the amount of energy devoted to moving the suspension through the pipe.
However, the researchers also found that adding energy to a suspension that contains rough particles can also cause the suspension to expand. This is because rough particles simply take up more space than smooth ones when tumbling in suspension. The end result is that putting more shear stress into the system can cause catastrophic clogging if the suspension expands too much.
“This is a fundamental advance in our understanding of the physics of suspensions in flow, and should help engineers and scientists address the manufacturing challenges that caught our attention in the first place,” Hsiao says.
“We’re now looking at ways to use the principles we discovered here to make the friction work in our favor.”
The paper, “Rheological state diagrams for rough colloids in shear flow,” is published in the journal Physical Review Letters. The paper was co-authored by Safa Jamali of MIT, and Emmanouil Glynos, Peter Green, Ronald Larson and Michael Solomon of Michigan.
The work was done with support from the National Science Foundation, under grant number 1232937, and the U.S. Army Research Office, under award number W911NF10-1-0518.
Note to Editors: The study abstract follows.
“Rheological state diagrams for rough colloids in shear flow”
Authors: Lilian C. Hsiao, North Carolina State University; Safa Jamali, Massachusetts Institute of Technology; Emmanouil Glynos, Peter F. Green, Ronald G. Larson, and Michael J. Solomon, University of Michigan
Published: Oct. 11, Physical Review Letters
Abstract: To assess the role of particle roughness in the rheological phenomena of concentrated colloidal suspensions we develop model colloids with varying surface roughness length scales up to 10% of the particle radius Increasing surface roughness shifts the onset of both shear thickening and dilatancy towards lower volume fractions and critical stresses. Experimental data are supported by computer simulations of spherical colloids with adjustable friction coefficients demonstrating that a reduction in the onset stress of thickening and a sign change in the first normal stresses occurs when friction competes with lubrication in the quasi-Newtonian flow regime, roughness increases the effective packing fraction of colloids. As the shear stress increases and suspensions of rough colloids approach jamming, the first normal stresses switch signs and the critical force required to generate contacts is drastically reduced. This is likely a signature of the lubrication films giving way to roughness-induced tangential interactions that bring about load-bearing contacts in the compression axis of flow.
This post was originally published in NC State News.